Recorded Video; Viewing Recorded Video; Selecting A Site; Starting A Retrieval Session - Honeywell Rapid Eye Operator's Manual

Recorded Video

Viewing Recorded Video

TIP!

Selecting a Site

Starting a Retrieval Session

Document 800-02951V3 Rev A
11/09
To view recorded video, use a Retrieval session. The recorded video is stored on a unit.
You can view the recordings from all cameras (or fewer). Many Multi sites can be
accessed, all at once.
Process
Start by selecting a Multi site and then running a Retrieval session. You can specify the
date and time of the start of the video. Recorded video reaches your PC until you end the
Retrieval session.
You can run retrieval and live sessions concurrently, from one or many sites.
1. Run View (see Starting View
2. Click the Sites tab.
3. Click a site name listed on the tab (see
1. After selecting a site, do one of the following:
• Click on the Toolbar.
• Right-click on the site name. Click Retrieval on the shortcut menu that appears.
• Click Retrieval on the Actions menu.
on page 21).
Selecting a Multi Site
3
on page 23).
49