Engine Removal - Sym Citycom.300i Service Manual

To this chapter contents
5. Removal & Installation of Engine

Engine Removal

Negative
Positive
Open the seat.
Remove battery cover (3 screw).
Remove the battery negative (-) cable.
Remove the battery positive (+) cable.
Open the seat.
Remove the luggage box (6 bolts).
(Refer to chapter 13)
Remove right and left side covers (4 screws on
each side.)
Remove rear center cover(1 screw).
Remove rear carrier (4 bolts).
Remove right and left side garnish(1 screw).
Remove body cover (4 screws & 1 coupler & 2
bolts).
Remove floor panel(4 bolts).
(Refer to chapter 13)
Remove fuel injection system of electrical
couplers and fuel hoes
Idle speed control valve
Remove idle speed control valve,
MAP sensor,
injector couplers.
Injector coupler
MAP sensor coupler
5-2