Microprocessor Module; Removing The Microprocessor Module - Dell XPS M140 Service Manual

Hide thumbs Also See for XPS M140:

Table of Contents

Microprocessor Module

CAUTION:

Before you perform any of the procedures in this section, follow the safety instructions in the

Product Information Guide

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically

touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE:

Handle the microsprocessor module with care. Hold the microsprocessor module by its edges and

do not touch the processor die (the small chip in the center of the module).

1 Follow the instructions in "Preparing to Work Inside the Computer" on page 7.

2 Loosen the three captive screws securing the microprocessor module cover, then remove the cover

and set it aside.

microprocessor module cover 2

NOTICE:

To ensure maximum cooling for the microprocessor, do not touch the heat transfer areas on the

microprocessor thermal-cooling assembly. Oils in your skin can reduce the heat transfer capability of the

thermal pads.

captive screws (3)

Microprocessor Module

Table of Contents