Panasonic KX-MB2100 series Operating Instructions Manual page 93

Feature
Setting the IP filtering
Setting the proxy server
Setting the community
name for SNMP
Setting the location
where you use this unit
Setting the service
name for Bonjour
Displaying the link local
address for IPv6
Displaying the IPv6
address for auto
configuration
Setting the IP address
for IPv6
Setting the default
router for IPv6
Setting the information
for scan to FTP
Setting the information
for scan to SMB
Setting the email server
information for scan to
email address
Setting the email server
information for fax to
email address
Setting the email server
information for error
notify
Setting the error notify
feature
Menu
[LAN FEATURE]
[LAN FEATURE]
[SNMP]
[SNMP]/[BONJOUR]
[BONJOUR]
[IPv6]
[IPv6]
[IPv6]
[IPv6]
[FTP FEATURE]
[SMB FEATURE]
[EMAIL FEATURE]
[EMAIL FEATURE]
[EMAIL FEATURE]
[EMAIL FEATURE]
Selection
Enter the IP filtering information.
1. Select the [LAN FEATURE] from the menu.
2. Click [Edit] next to [IP FILTERING].
3. Click [Edit] next to [FILTER (IPv4)]/[FILTER
(IPv6)].
4. Change the mode and edit IP filtering information.
A [Submit]
5. Close the web browser.
Enter the proxy server information for Google
™
Print . Consult your service provider or network
administrator for details.
Enter the SNMP community name. Consult your service
provider or network administrator for details.
Enter the location information of the unit.
Enter the Bonjour service name.
The link local address will be displayed.
The IP address for auto configuration will be displayed.
Enter the IP address for IPv6. Consult your service
provider or network administrator for details.
Enter the default router address for IPv6. Consult your
service provider or network administrator for details.
Enter the FTP server information to send scanned
images from the unit to an FTP server. For details about
this feature, see the scanning chapter.
Enter the SMB folder information to send scanned
images from the unit to an SMB folder. For details about
this feature, see the scanning chapter.
Enter the email server information to send scanned
image from the unit via an email. For details about
feature, see the scanning chapter.
Enter the email server information to send fax message
from the unit via an email. For details about feature, see
the fax chapter.
Enter the email server information to send error notify
from the unit via an email.
1. Select the [EMAIL FEATURE] from the menu.
2. Click [Edit] next to [EMAIL SERVER].
3. Enter email address (from), email server
information, and time zone.
4. [Submit]
5. Close the web browser.
[ENABLED]: The unit will send an email to registered
destinations when a problem occurs.
[DISABLED] (default): Deactivates this feature.
9. Network
®
Cloud
93