Using The 2-Bay Battery Charger - Intermec PB 3 User Manual

6

Using the 2-Bay Battery Charger

Status LEDs
2-Bay Battery Charger Accessory
1 Plug the AC adapter into the 2-bay charger.
2 Connect the adapter to AC power. The Status LEDs turn green,
indicating that the charger is ready to use.
3 With the contacts on the bottom and the arrow pointing toward
the LEDs, place a battery into one of the bays.
4 Slide the battery towards the LEDs. The battery snaps into place.
Installing a Battery in the 2-Bay Charger
If the battery is not charged, the Status LED for that bay turns red.
The Status LED turns green when the battery is charged.
PB3 Mobile Printer User's Guide