Using The 2-Bay Battery Charger - Intermec PB3 User Manual

6
After about three hours the Battery LED turns off. The battery is
fully charged.
12
11
1
10 2
9
3
8
4
7
5
6
Note: The wall mounted charger is Class II equipment. Multiple
plug configurations comply with most international standards.
The wall mounted charger is not supplied with plugs for use in
Korea.

Using the 2-Bay Battery Charger

Use the 2-bay battery charger to charge the batteries.
To use the 2-bay charger
1 Plug the AC adapter into the 2-bay charger.
2 Connect the adapter to AC power. The Status LEDs turn green,
indicating that the charger is ready to use.
Status LEDs
3 With the contacts on the bottom and the arrow pointing toward
the LEDs, place a battery into one of the bays.
PB3 Mobile Printer User's Guide