Rear Cushion - Sym Fiddle 50 Service Manual

This chapter Contents
14. REAR WHEEL/SUSPENSION
Shaft nut
Installation
Install the rear wheel and tighten the nut.
Tighten torque: 10.0~12.0kgf-m
AICV system hose
Nuts
Install exhaust pipe & muffler.
Install AICV system hose.
Tighten torque (bolt): 3.0~3.6kgf-m
Tighten torque (nut): 1.0~1.4kgf-m
Bolts
Upper mounting bolt

Rear Cushion

Removal
Remove body cover.
Remove air cleaner.
Remove rear cushion upper & lower bolts.
Remove rear cushion.
Installation
Lower mounting bolt
Install the rear cushion.
Tighten the upper & lower mounting bolts to
specified torque.
Torque value:
Upper mounting bolt: 3.5~4.5kgf-m
Lower mounting bolt: 2.4~3.0kgf-m
Press down the tail of the scooter for several
times to check cushion operation.
Installation all components in reverse order of
removal procedures.
Install air cleaner.
14-4