Sym Fiddle 50 Service Manual page 125

13. STEERING/FRONT WHEEL/SUSPENSION
Lubricate the top cone race seat with grease.
Screw the cone race in to top ball bearing seat till
touching, and then screw out the cane race
1/4~3/8 turns.
Torque value: 0.25kgf-m
Caution
Check the steering stem that should be rotated
freely and no clearance in vertical direction.
Install the steering stem lock nut and tighten the
nut by means of holding the top cone race body.
Torque value: 1.5kgf-m
Install handle post.
Torque value: 4.0~5.0kgf-m
Install in reverse order of removal procedures.
13-12
This chapter Contents
Steering lock nut
Top cone-race
Return 1/2 turns
Locking to
1/4~3/8 turns
Handle post