Default Recording Settings - Philips DVDR9000H User Manual

Default recording settings

You can preset your recording settings in
the recording setup menu.
A
Press SYSTEM on the remote control.
The system setup menu appears.
B
Press to select { Preferences }.
C
Press NEXTÉ to select { Recording }.
Recording
Preferences
Record mode
Language
Auto protect
Chapters
Recording
Preferences
Sat record
Direct rec
dvdr9000h_eu_eng2.indd 37 dvdr9000h_eu_eng2.indd 37
Before Recording
SP
Lang I
Off
Smart
Off
On
D
Use keys to select the setting you
wish to change and press NEXTÉ to
access its options.
Instructions and explanation of the
options are provided in the following
pages.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at the
current state.
E
To exit, press SYSTEM.
Record Mode settings chart
Record Mode Hours of recordings can be stored on the Ł
HDD or an empty DVD recordable disc.
HDD
(400 GB)
HQ
80
(high quality)
SP 160
(standard play)
SPP 200
(standard play plus)
LP 250
(long play)
EP
330
(extended play)
SLP 500
(super long play)
SEP 650
(super extended play)
Helpful Hints:
– Changing the Recording Mode will clear
the contents in the temporary HDD storage,
only the marked contents (in red bar) will be
recorded onto the hard disk drive (HDD) of
this recorder.
– You can record up to 500 titles on the
HDD if the hard disk capacity is suffi cient.
(continued)
DVD±R/ DVD+R Ł
DVD±RW Double Layer
1
1 hr 55 mins
2
3 hrs 40 mins
2.5
4 hrs 35 mins
3 5 hrs 30 mins
4
7 hrs 20 mins
6
11 hrs 5 mins
8 14 hrs 45 mins
37
2005-10-13 9:18:10 AM 2005-10-13 9:18:10 AM