Before Recording - Philips DVDR9000H User Manual

Before Recording

Recordings
(underlined options are the factory default settings)
Record mode
Language
Auto protect
Chapters
SAT record
Direct rec.
38
dvdr9000h_eu_eng2.indd 38 dvdr9000h_eu_eng2.indd 38
(continued)
The recording mode defi nes the picture quality of recordings and the
maximum recording time on the HDD (hard disk drive), see page 37 on
'Recording Mode Setting Chart'.
Important! When copying from HDD to a recordable DVD, the
recording mode of the selected recording in the HDD will automatically
be transferred. Selecting another recording mode is not possible.
The factory default setting is SP.
Selects the recording language to be used for TV programmes
(analogue TV channels only) which are transmitted an additional audio
language. For example, if a programme is available in English and Spanish,
with Spanish being the additional language option.
{ Lang I } – Original broadcast language.
{ Lang II } – Additional audio language.
With this feature turned on, the new recording titles will be automatically
protected.
{ On } – Deletes and edits on the recorded titles are not possible.
{ Off } – Turns off the function.
Automatically divides a recording (title) into chapters by inserting chapter
markers at a specifi c interval. This enables you to access a specifi c point in
the recording quickly.
{ Off } – No chapter marker is inserted in the recording.
{ Standard } – Chapter markers are inserted automatically during
recording at approximately 5 (fi ve) minutes interval.
{ Smart } – This setting is only available for the DV camcorder
recording. A chapter marker is inserted whenever
there is a break in the recording, for example, when
the recording is stopped or paused and restarted again.
This feature is only available if you have connected a Satellite Receiver or
other devices to the EXT 2 AUX-I/O scart socket of this recorder, see
page 41 for more information.
{ Off } – Turns off the function.
{ EXT2 } – Enables this recorder to start and stop recording when
a signal is received from the connected device.
With this feature, you can immediately record the programme that you
are viewing on the TV by pressing REC button without the needs of
turning on this recorder, see page 41 for more information.
{ On } – Enables recording directly from the TV display.
{ Off } – Turns off the function.
2005-10-13 9:18:10 AM 2005-10-13 9:18:10 AM