Record To Hard Disk; Recording Tv Programmes - Philips DVDR9000H User Manual

Dvd recorder / hard disk
Hide thumbs Also See for DVDR9000H:
Table of Contents

Advertisement

IMPORTANT!
Unrecordable pictures
Pictures with copy protection cannot be
recorded on this recorder. When the
recorder receives a copy guard signal, the
recorder continues to record but only a
blank or grey picture will be recorded.

Recording TV programmes

Follow the instructions below to record
the TV programmes onto the HDD,
where you can store for future viewing
and copy to a recordable DVD disc if
required.
Record the current TV programme
Press INFO m on the remote control
A
to display the Time Shift video bar.
B
Press
(RECORD) on the remote
control.
The current TV channel will be
recorded, up to maximum of 6 (six)
hours.
21:00
[Start Rec] "Record from here" [Record] "Record Program"
Cancel rec.
TIPS: Set the appropriate recording mode. It determines the actual recordable time to the HDD or a
recordable DVD, see page 38.
dvdr9000h_eu_eng2.indd 39
dvdr9000h_eu_eng2.indd 39
C
A
B
C
D
E
F
23:13
BACK
MORE INFO

Record to Hard Disk

If the TV programme data is available in
the GUIDE Plus+ system
"Record 1 Program" will appear at the
right end of the video bar. The recording
will stop automatically at the end of the
TV programme.
If you want to record the following TV
programme, press
(RECORD) again.
If the TV programme data is not available
in the GUIDE Plus+ system, pressing
(RECORD) again will set the recording
time in 30-minute increments, up to a
maximum of 6 (six) hours.
To stop the recording before the
scheduled ending, press
Record a specifi c section of TV
programmes
Press INFO m on the remote control
to display the Time Shift video bar.
Use
keys to select a TV programme
that can be found in the temporary HDD
storage.
Use
keys to search for the beginning
of the scene where you want to start
Å
recording, then press
Press the Red button on the remote
control to start recording from here.
Press
(PLAY) to continue playback.
Press NEXTÉ to search for the point
where you want to end the recording
and press
(STOP) on the remote
control.
A red marking will be visible on the
video bar to indicate the marked
recording.
(STOP).
(PAUSE).
39
2005-10-13 9:18:10 AM
2005-10-13 9:18:10 AM

Advertisement

Table of Contents
loading

Table of Contents