Hdd Setting; System Setting (General) (Shadow Options Are The Factory Default - Philips DVR7100/75 User Manual

Digital Audio Output

HDD Setting

HDD Space
Delete HDD

System Setting (General) (shadow options are the factory default

settings)
Display Brightness
ECO Standby Mode
Info Timeout
Setting and Adjustments
Switch the method for outputting audio signals when you
connect the DIGITAL AUDIO OUT socket to a
component such as an AV amplifi er (receiver). For
connection details, see 'Step 3: Connecting the audio
cords' on page 15.
If you connect a component that does not accept the
selected audio signal, a loud noise (or no sound) will
come out from the speakers, and may affect your ears or
cause speaker damage.
{ Dolby Digital } − Select this when the recorder is
{ PCM } − Select this when the recorder is connected
to an audio component without a built-in
Dolby Digital decoder.
Displays the remaining HDD space.
Erases all the recorded titles in the HDD at once.
Note that protected titles are also erased.
Press OK to confi rm and press BACK
Select the brightness of the recorder display panel.
{ Normal } – Normal brightness.
{ Dimmed } – Medium brightness.
{ Off } – Turns off the display.
This is an energy saving mode.
{ On } − When you switch the recorder to standby
mode, the display panel will turn blank to save
power.
{ Off } − Clock will display on the recorder's display
panel when switching off to standby mode.
{ Off / 5 Sec / 10 Sec / 15 Sec / 20 Sec / 30 Sec / 60 Sec }
– Select the display duration for a programme
information box.
connected to an audio component
with a built-in Dolby Digital decoder.
to exit.
(continued)
37