Integrated Peripherals - Foxconn H55MX-S Series User Manual

Integrated Peripherals

CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
► IDE Configuration
► OnBoard Configuration
► SuperIO Configuration
► USB Configuration
↑↓←→:Move Enter:Select
► IDE Configuration/OnBoard Configuration/SuperIO Configuration/USB Configuration
Press <Enter> to go to relative submenu.
IDE Configuration
Configure SATA as
SATA#1 IDE Configuration
SATA#2 IDE Configuration
IDE Detect Time Out
↑↓←→:Move Enter:Select
► Configure SATA as
This item is used to set the operation mode of your SATA ports 1, 2, 3, 4, 5, 6. Set to [IDE] can
configure the SATA ports to support IDE mode.
► SATA#1 IDE Configuration
SATA#1 are the SATA ports 1, 2, 3, 4 of the motherboard. This item allows you select the
mode of the SATA ports. Setting values are: [Compatible], [Enhanced].
► SATA#2 IDE Configuration
SATA#2 are the SATA ports 5,6 of the motherboard. This item allows you select the mode of
the SATA ports. Setting values are: [Disabled], [Enhanced].
Integrated Peripherals
+/-/:Value
F9:Optimized Defaults
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
+/-/:Value
F9:Optimized Defaults
[Press Enter] [Press Enter]
[Press Enter]
[Press Enter] Configure the IDE
[Press Enter]
Device(s).
F10:Save ESC:Exit
IDE Configuration
[IDE] [IDE]
[Enhanced]
[Enhanced]
[35]
IDE
Disabled
F10:Save ESC:Exit
33
Help Item
F1:General Help
Help Item
Options
F1:General Help