Battery Replacement - Pride Mobility Jazzy 1107 Owner's Manual

V I I I .

Battery Replacement

A battery wiring diagram is printed on a decal located inside the battery box lid. See VI. “Batteries and Charging” for
correct battery specifications.
WARNING! Prevent injury. Do not replace battery when seat is occupied.
WARNING! Battery posts, terminals, and related accessories contain lead and lead compounds.
Wear goggles and gloves when handling batteries and wash hands after handling.
WARNING! Power chair batteries are heavy. See specifications table. If you are unable to lift that
much weight, be sure to get help. Lifting beyond your capacity can result in personal injury.
To replace the batteries:
1. Turn off the power to the controller.
2. Make sure that the power chair is in drive mode. See III.
“Your Power Chair.”
3. Remove the battery boxes. See IV. “Assembly/Disas-
sembly.”
4. Disconnect the wiring harness from the batteries.
5. Remove the batteries from the battery boxes.
6. Place new batteries in the battery boxes. See figure 35.
7. Reconnect the battery harnesses according to the bat-
tery wiring diagram label. See figure 36.
WARNING! Prevent injury. Make sure you
tighten the fasteners so that the connections
are secure.
8. Reinstall the battery boxes onto the power base. Make
sure that the battery box latches are in the up (locked)
position.
9. Charge the batteries. See VI. “Batteries and Charging.”
48
C A R E A N D
www.pridemobility.com
M A I N T E N A N C E
REAR BOX
Figure 35. Battery Boxes
Figure 36. Battery Wiring Diagram
MAIN CIRCUIT BREAKER
FRONT BOX
Jazzy 1107