To Modify Pin Code; Reset Base To Default Setting; Base Setting On Base Unit - Sharper Image SP6075 User Manual

To modify pin code

A PIN code is required to access some functions on the handset and base.
The default PIN is 0000, but you can change it to your personal 4-digit PIN.
1). In standby mode, press
2).
press or
button to enter next step base setting,
3). press
4).
press or
button to confirm , display will show "PIN ?"
5). press
input pin code by numeral keys (0000, if you did not change before)
6). press button to confirm , display will show "NEW PIN "
input new pin code by numeral keys (if you need to change pin code)
button to confirm , display will show "REPEAT "
7). press
input new pin code again (same pin code as step 6)
button , handset will give a confirmation tone to tell pin code
8). press
modification success. If operation error, handset will give a long alert tone.
9). press button to return to standby mode.
To reset base to default settings
This allows you to restore the base to its default settings.
The base menu settings will be returned to their initial default settings,
1). In standby mode, press
2).
press or
button to enter next step base setting,
3). press
4).
press or
button to confirm , display will show "PIN ?"
5). press
input pin code by numeral keys (0000, if you did not change before)
button , base and handset will give a confirmation tone
6). press
to tell base power reset and hanset re-link up with base unit.
7). press button to return to standby mode.

BASE SETTING ON BASE UNIT

BASE BASIC SETTING FROM THE HANDSET
To set base to ring volume
SNOOZE/RING
To set base LCD display contrast
CONTRAST
To page handset
PAGE
BASE LED Indication
~27~
button to enter setting mode,
button to find " BS SETTINGS",
button to find "MODIFY PIN"
button to enter setting mode,
button to find " BS SETTINGS",
button to find "BS DEFAULT"
In standby mode, press"
base LCD will show present base ring volume, press the button
to adjust base ring volume from 1 to 3, OFF (circularly)
In standby mode, press"
base LCD will show different display contrast, press the button
to choose your favority contrast.
The function is for base searching handset.
In on-hook mode, press"
handset will ring with special melody(different INT,EXT ring melody)
handset display will show "PAGE....". press any button on handset
ring will stop at once.
In charging mode, base red LED will keep lighting on.
In off-hook mode, base red LED will keep lighting on.
In registering mode, base red LED will keep blinking 120s.
In page mode, base red LED will keep blinking 60s.
" button on base top,
SNOOZE/RING
" button on base top,
CONTRAST
PAGE " button on base top,