Table of Contents
Advertisement
To set handset default settings
1). In standby mode, press
2).
press
or
button to enter next step handset setting,
3). press
4).
press
or
5). press
button to confirm , display will show "PIN?"
directly input pin code 0000(default pin code).
6). press
button to confirm, display will show "PB CLR-? Y/N"
with "y" letter blinks, you can press
If "Y" is selected , all of phonebook memeories will be deleted
If "N" is selected , all of phonebook memeories will not be deleted
7). press
button to confirm , handset display will power reset one time,
then handset will re-search base unit again.
* after handset default operating, handset menu setting items will be reset to
ex-factory status, besides actual display time and phonebook memories
(if you choose "N" while handset show "PB CLR-? Y/N" before default executing)
To set handset LCD contrast
1). In standby mode, press
2).
press
or
button to enter next step handset setting,
3). press
4).
press
or
5). press
button to confirm , display will show "LEVEL 5 "
6).
press
or
7). press
button to confirm the selection,
8). press
button to return to standby mode.
To turn on/off "NON-DISTURB" function
Turn on "NON-DISTURB" function
In standby mode, press and hold
will appear on display, handset enter external call "NON-DISTURB" mode,
and icon
if external call comes, handset will not ring, but it still ring for internal call.
Turn OFF "NON-DISTURB" function
While handset is in external call "NON-DISTURB" mode, press and hold
about 3s, handset will give a beep tone, and icon
handset return to normal mode.
To turn off voice mail prompt icon
If you have applied voice mail service, and while you have a new voice mail,
the icon (
) will flash on the right top corner of LCD. You can get it
by calling service number.
When you have a voice mail prompt on handset display, but you are unwilling to get it,
and the prompt icon (
as below:
press
is displayed, press
to standby mode,
~25~
button to enter handset setting mode,
button to find " HS SETTINGS",
button to find "HS DEFAULT"
button to choose "N"("N" blink)
button to enter handset setting mode,
button to find " HS SETTINGS",
button to find "CONTRAST"
button to choose suitable contrast what you like,
button about 3s, handset will give a beep tone,
) does not disappear all the time, you can disable the icon
button to review incoming call(CID) list, while CID number(or name)
button about 3s till handset sound a "di du" beep tone, then return
will disappear from display.
button
will disappear on display,
Advertisement
Table of Contents
