Table of Contents
Advertisement
(3). To turn out of range alarm tone on/off
1). In standby mode, press
2).
press
or
3). press
button to enter next step handset setting
4).
press
or
5). press
button to confirm, display show "KEY TONE"
6).
press
or
The balance setting is same as "
To use a multi-handset system
CH-D707 Twin, Triple
If you have a
four handsets.
You can have up to 5 handsets registered to the base unit, as numbers
1, 2, 3, 4 or 5 with more than one handset registered to your base unit, you can
>
make intercom calls from one handset to another handset
>
make an intercom call while you are on an outside call
>
transfer an outside call from one handset to another or to the corded base
set up a three-way conference call between yourself, an outside call and another handset
>
Each handset has its own number 1, 2, 3, 4 or 5 which is shown at the lower left corner
like as "HS-- 1".
Please note :
Among these handsets registered to the base, only one outside call and two
calls can take place at the same time.
When a cordless handset is using the outside line,
will show icon "
alert tone and then display "LINE BUSY" a moment, then drop line automatically.
but other handsets can still make a intercom call.
To make an internal call
For instance, HS1 make intercom call to HS2
button on handset1, you hear a constant tone in the earpiece
1). Press
will show "HS ?
2, 3, 4"(if base unit registered 4 handset), handset 1 also show icon
( icon
blinks )
2). Key in the number of other handset
handset 1 will show "CALLING HS 2".
will show "HS1 CALLING".
3). Press
button on handset 2 to answer the intercom call, the two handset enter internal
talk mode, handset start to calculate internal talk time, icon
4).
press
button to end internal call on any handset.
To transfer an outside call
When you've made or answered an outside call, you can transfer the call to another handset .
**For instance, HS1 transfer an outside call to HS2
button to enter handset setting mode,
button to find " HS SETTINGS"
button to find "TONE SETUP"
button to find "RANGE ALARM"
To turn key tone on/off
or
Quad
" in standby mode, if you want to get line , handset will give a
(for instance 2)
The called handset 2 will ring and the display
step 6 ~10.
"
system, you already have two, three or
the other
handsets
will be steady on display.
intercom
handset 1
and
~22~
Advertisement
Table of Contents
