Sennheiser SENNSIS 2020-D Quick Manual page 2

Two types of receiver are available:
5
3
1
BODYPACK RECEIVER
This receiver is switched on by pressing the button
on the top. It is used by inserting either headphones
or an inductive neck loop (for hearing aid wearers)
into the socket on the side. The volume is
controlled by rotating the wheel on the front. If the
channel needs to be changed this can be done by
pushing the rocker switch in the centre of the
volume control.
The receiver automatically switches off 5 mins after
the headphones/ neck loop plug is removed, or by
pressing the button on the top for 3 seconds.
1
Volume control
2
▲/▼ rocker button for channel selection
3
Headphone socket
4
Display (see above)
5
Charging status LED
6
ON/OFF button
www.tourguidesystem.co.uk
Copyright © 2011 Sound Induction Systems Ltd, Unit 24 Mochdre Industrial Estate, Newtown, Powys SY16 4LE
6
5
4
2
1
4
3
Please turn over for transmitter instructions
email: sales@soundinduction.co.uk
STETHOSET RECEIVER
This receiver is switched on by opening the arms and
resting in the ears. The volume is controlled by rotating
the wheel on the front. If the channel needs to be
changed this can be done by pushing the rocker switch
in the centre of the volume control.
The receiver automatically switches off when the
receiver is removed from the ears to preserve battery
life.
Earpads can be cleaned using antibacterial wipes.
1
Volume control
2
▲/▼ rocker button for channel selection
3
Red/Green LED for charge status
4
Display
(see below)
5
Earbows
6
Earpads
Receiver Display
2
1
Channel display
2
Battery status display
3
Volume display
4
RF signal indication
3
5 6
4
1
Tel: (01686) 628012
2