Download Print this page
Sennheiser 2020-D Quick Manual
Sennheiser 2020-D Quick Manual

Sennheiser 2020-D Quick Manual

Tour guide system
Hide thumbs Also See for 2020-D:

Advertisement

Quick Links

INTRODUCTION
Please read these instructions and familiarise yourself with the equipment before your event. The instructions are intended as a quick guide only. Should you require more information please refer to
the supplied manufacturers handbook (also available on the download section of our website) or contact us.
A tour guide system is a wireless radio system used to transmit a message from a presenter to listeners. The presenter simply speaks into a microphone and the listeners use receivers to hear the
message. A tour guide system can be used indoors and outdoors (with a maximum range of 100m). Up to 6 channels can be used simultaneously.
After each use, recharge all transmitters and receivers so they are ready for the next event.
1 IEC socket and mains switch
2 Handheld transmitter
3 Bodypack transmitter
4 Dual transmitter battery charging docks
5 Stethoset receiver
6 Receiver charging dock
7 Bodypack receiver
8 Master charging dock
9 Copy button
10 Copy available LED
11 Temp error LED
12 Power LED
13 Trolley frame mount (underneath)
CHARGER
The charger can simultaneously recharge 20 receivers and 2 transmitter batteries.
The receivers are charged in the charging docks (as seen right).
The transmitter batteries are charged in the dual transmitter charging docks.
To charge the system remove the mains cable from the pocket on the inside of the storage case lid
and plug into the charger and a mains outlet.
Switch the charger ON.
A LED on each receiver and the transmitter charging dock will indicate the charging status:
Red=Charging in progress. Green=Fully charged.
A useful facility of the charger case is the COPY function. This allows the user to preselect all the
channels of the receivers with the push of one button. Place a receiver on the required channel into
the master charging dock and press the copy function button. This will instantly set all the other
receivers in the charger to the required channel.
Copyright © 2018
Sennsis Tour Guide Systems, Sound Induction Systems Ltd, Unit 24 Mochdre Industrial Estate, Newtown, Powys SY16 4LE
Sennheiser 2020-D tour guide system - Quick guide
ENSURE TRANSMITTER AND RECEIVERS ARE CHARGED PRIOR TO USE
Please turn over for transmitter and receiver instructions
www.tourguidesystem.co.uk
2
3
4
1
1
7
8
9
email: sales@soundinduction.co.uk
5
6
11 12
10
13
Tel: (01686) 628012
V0518

Advertisement

loading

Summary of Contents for Sennheiser 2020-D

  • Page 1 Sennheiser 2020-D tour guide system - Quick guide ENSURE TRANSMITTER AND RECEIVERS ARE CHARGED PRIOR TO USE 
 INTRODUCTION Please read these instructions and familiarise yourself with the equipment before your event. The instructions are intended as a quick guide only. Should you require more information please refer to the supplied manufacturers handbook (also available on the download section of our website) or contact us.
  • Page 2 STETHOSET RECEIVER BODYPACK TRANSMITTER This receiver is switched on by opening the arms and resting in the ears. The volume is controlled The bodypack transmitter is used with a headband microphone plugged into the MIC socket on by rotating the wheel on the front. If the channel needs to be changed this can be done by pushing the top.