Sony MZ-E505 Service Manual page 16

MZ-E505
• Description of the error display codes
Contents of fault Display code
No error
Servo system error
TOC error
Power system error
Offset error
4-6-3. Clearing the error display code
After servicing, reset the error display code.
1. Set the TEST MODE.
2. Press the DISPLAY key on the remote control activates the self-
diagnosis display mode.
3. To reset the error display code press X key on the remote con-
trol when the code is displayed.(except for R_ - - - - display)
(All the data on the 1, N, N1 and N2 will be reset)
4. Press X key on the remote control again.
16
Meaning of code
00 No error
01 Access target address illegally specified
02 HIGH TEMP
03 FOCUS ERROR
04 SPINDLE ERROR
11 TOC ERROR
12 READ DATA ERROR
22 LOWBATT
31 OFFSET ERROR
32 FE_ABCD_OFFSET_ERR
33 TE_ABCD_OFFSET_ERR
34 X1_TE_OFFSET_ERR
Simplified
Description
contents
– – – – No error
Adrs An attempt to access an abnormal address.
Temp HIGH TEMP
Fcus Focus off-center.
Spdl Abnormal rotation of disc
TOC
Data
LBat Instantaneous interruption detected.
Ofst Offset error
ABCD FE ABCD Offset error
TE TE ABCD Offset error
X1TE X1 TE ABCD Offset error