Table of Contents
Advertisement
↓
2. Press
to the active Trail Name|
→
3. Press
then
4. To return to the previous page, press
left the Edit Trail menu, you will notice a new trail was started with a
new sequential number. In the example below, the new trail is number
15, showing zero points. Note Trail 14 is inactive, but is still visible on
the map.
A new trail, "Trail 15," is created when Trail 14 is made inactive. Any
new travel will be recorded in this trail, which is active and visible.
Trails do not need to be visible in order to be active.
You can save and recall up to 10 different plot trails, which can be
copied to your MMC for archiving or for transfer to your MapCreate
software.
Tip:
Another quick way to stop recording one trail and begin a new one
is to use the New Trail command: Press
|
T
ENT
RAILS
Caution:
You also have the option of completely turning off trail
recording, under the trail Options command. However, if the
Update Active Trail option is left off, it will cancel the automatic
trail creation feature.
Displaying a Saved Trail
The active trail is automatically displayed on the map (the "Visible"
option) with the factory default settings. You can selectively turn the
trail display off and on for any saved or active trail. In the Saved Trails
List, visible trails have a check mark in front of the trail name.
↓
to
|
A
ENT
CTIVE
|
.
ENT
.
ENT
. This unchecks the Active option.
EXIT
122
|
|
|
EXIT
EXIT
EXIT
|
MENU
MENU
. As you
|↓ to
M
Y
Hide quick links:
Advertisement
Table of Contents
