Navigate To Cursor Position On Map - Lowrance LCX-17M Operating Instructions Manual

Navigating to Man Overboard: Navigation Page, left, and Map Page,
right. The victim is astern of the vessel; the GPS shows which
direction to steer to for the rescue.
The man overboard position is also stored in the waypoint list for future
reference. It can be edited the same as any other waypoint.
To cancel navigation to MOB, press | |↓ to
MENU MENU C
ANCEL
| |← to | . The unit stops showing navigation
N ENT Y ENT
AVIGATION ES
information.

Navigate to Cursor Position on Map

The Go To Cursor command navigates to the current cursor position on
the map. It's a quick and handy way to navigate to anything you can
see on the map display.
1. Use the cursor (controlled by the arrow keys) with the zoom in and
zoom out keys to maneuver around the map until you find a location
you'd like to visit.
2. Center the cursor over the location to select it. See the example in
the following figure. Many map items such as waypoints, Points of
Interest, towns, etc. can be "selected," and appear "highlighted" with a
pop-up box. Other features, such as a river or a street intersection will
not appear "highlighted," but the cursor will take you to those locations
just the same.
119