Horizon Fitness T-PRO Owner's Manual page 12

T-pRO ASSEMBLY STEp 3
HARdWARE fOR STEp 3 :
BOLT (A)
20 mm
Qty: 6
12
SPRING WASHER (B) ARC WASHER (C)
8.2 mm 8.4 mm
Qty: 6 Qty: 6
CONSOLE &
HANDLEBAR
CABLES
CONSOLE
ARC WASHERS (C)
SPRING WASHERS (B)
BOLTS (A)
CONSOLE MAST
Open haRdwaRe fOR sTeP 3.
A
gently hold the cOnsOle above of the
B
cOnsOle masTs.
Connect the cOnsOle & handlebaR
C
cables, carefully tucking wires in masts to
avoid damage.
Attach each side of the cOnsOle using 3
D
bOlTs (a), 3 sPRing washeRs (b) and 3
aRc washeRs (c).
Rotate the CONSOlE MASTS until the
E
spacing between the handlebars and the deck
are the same. Tighten bOlTS from step 1 and
then step 3.