Booting The Terminal; Performing A Warm Boot - Symbol VRC 89XX Product Reference Manual

VRC 89XX Radio Terminal Product Reference Guide for Embedded Windows
The network configuration screen displays. If desired, configure the terminal for wireless
communication (refer to
Note: The network configuration screen appears the first time you start the
terminal after power is removed, but not on subsequent warm or cold
boots.
To suspend the terminal's operation, press the Suspend button. All DRAM and Flash data
is preserved, so the applications running continue after suspension. Press the Suspend
button again to power up the terminal. This power-up process takes about 12 seconds.
The power is on at all times if the terminal is hard wired to the vehicle battery.

Booting the Terminal

Release to Suspend
Release to Warm Boot
Release to Cold Boot

Performing a Warm Boot

A warm boot restarts the operating system, closes all running applications, and preserves
the saved data in RAM. In the Windows CE .NET environment, the working registry is
replaced by the latest saved copy of the registry.
To perform a warm boot, press and hold down the Suspend Button until the Release for
Warm Boot message appears (6 seconds).
4-2
Chapter 5, Spectrum24 Network
Table 4-1. Suspend Button Operation
Mode
1 - 6 seconds
6 - 15 seconds
15 seconds or more
Configuration).
Press Suspend button
®
CE .NET