Advertisement
Using the Power Icon
The Power icon is the top icon on the Direct Access Panel on the
left side of the display. To select it, press it with the pen.
If the terminal is On: the Power icon places the terminal into
Sleep mode (see
Understanding the Power Save Modes on page
24). After a time in Sleep mode, the terminal shuts off.
If the terminal is in Sleep mode: the Power icon re-activates the
session that was active when the terminal went to Sleep.
Tapping the screen or a keypad key also activates the terminal.
If the terminal is Off: the Power icon starts the terminal.
Starting the Terminal
To start the terminal, press the Power icon with the pen. Hold
the pen down until the terminal beeps and begins to boot (about
one second).
If the terminal does not boot, check to make sure you have a
charged battery, inserted correctly, and that the Run/Ship
switch in the Battery Well is set to "Run". To force a terminal to
re-boot, press the <Ctrl-Alt-Del> keys, or press the Force On
switch in the IrDA port (see
Starting Applications
After the terminal boots, one of the following appears:
• a W
F
IN
RAME
• a Terminal Emulator Host Choice List (shown on
or
• a custom application, specific to your facility.
Follow your facility's procedures for logging in.
Parts of the PPT 43xx on page
window,
Quick Reference
7
5).
page
8),
Advertisement
