Using The Ip Phone; Place A Call - Polycom IP 601 User Manual

Using the IP Phone

Place a Call:

1) Pick up the handset, press the
soft key, or press the
2) Enter the number you wish to call, and
press the or
Dial
E
NOTE: You may optionally dial local or toll calls
using 10 digits.
Put a Call on Hold:
1) During an active call, press the
soft key, or press the
2) To resume the call, press the
soft key, or press the
Consultative Transfer (announce
the call before transferring):
1) During an active call, press the
soft key. This will put the caller on hold.
2) Enter the number to which you wish to
transfer the call and press the
soft key.
3) When the Transfer party picks up you
may begin your consultation. The first
party will still be on hold.
4) When you are done with your consult,
press the soft key.
Trnsfer
5) Call will immediately transfer and you A
may hang up.
Blind Transfer (transfer without
announcement):
1) During an active call, press the
soft key. This will put the caller on hold.
2) Press the soft key.
Blind R
3) Enter the number to which you wish
to transfer the call and press the
soft key.
61743/2-08/4552
New Call
key.
D
soft key.
Send
Hold
button.
Hold
M
Resume C
C
button.
Hold
M
Trnsfer
A
D
Send
Trnsfer
A
D
Send
Polycom IP 601 Phone
4) Call will immediately transfer and you may
hang up.
Create a 3-Way Conference Call:
1) During an active call, press the
soft key. This will place the current caller
on hold.
2) Dial the number of the party you wish
to add to the call and press the
soft key.
3) When the party answers, press the
soft key. All parties will now be in conference.
Split a 3-Way Conference Call
(disconnect conference and place
the two other parties on-hold):
1) During the conference, press the
soft key.
2) The two parties will be put on-hold on
separate lines.
3) Using Display Control keys to navigate to
the desired party, you may then press
to re-establish individual call.
Reject a Call and Let
Voice Messaging Answer:
1) When an incoming call arrives that you
do not wish to answer, press the
soft key.
2) Your phone will stop ringing and the caller
will be sent to your voice messaging.
Note: If Simultaneous Ring is active, call will contin-
ue to ring on other designated line(s).
Answer a Call on Your Second Line:
1) While the first call is active, and
the second call begins ringing,
use the Display Control keys to
select the incoming call.
S
Confrnc
D
Send
S
Confrnc
T Split
Resume
C
Reject
S
1