DHD-801/1601 User's Guide
cabling for all connections in order to make it easier to
transit all stations to 100Mbps.
You can connect any combination of end-station computers,
servers, and other addressable network devices to the
twisted-pair ports using straight-through twisted-pair
cables. Do not use crossover cables. The following figure
illustrates the pin assignments for a straight-through
cable:
When connecting an end-station computer or a server, the
system being connected should have an Ethernet or Fast
Ethernet network interface card with a twisted-pair port.
The following figure shows typical connections between the
hub and end nodes:
Making Connections
11