Table of Contents
Advertisement
Quick Links
Model No. WLTL19709.0
Serial No.
Write the serial number in the space
above for reference.
QUESTIONS?
If you have questions, or if parts
are damaged or missing, PLEASE
CONTACT THE STORE WHERE
YOU PURCHASED THIS
PRODUCT.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial
Number
Decal
USER'S MANUAL
Advertisement
Table of Contents
Related Manuals for Weslo WLTL19709.0
Summary of Contents for Weslo WLTL19709.0
- Page 1 USER'S MANUAL Model No. WLTL19709.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, PLEASE CONTACT THE STORE WHERE YOU PURCHASED THIS PRODUCT.
-
Page 2: Table Of Contents
This drawing shows the location(s) of the warning decal(s). If a decal is missing or il- legible, go to www.iconfitness.com and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. WESLO is a registered trademark of ICON IP, Inc. -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product. - Page 4 20. Do not attempt to raise, lower, or move the treadmill, and before performing the mainte- treadmill until it is properly assembled. (See nance and adjustment procedures described in ASSEMBLY on page 6, and HOW TO FOLD this manual. Never remove the motor hood un- AND MOVE THE TREADMILL on page 13.) less instructed to do so by an authorized ser- You must be able to safely lift 45 lbs.
-
Page 5: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the new WESLO CADENCE ing this manual, please see the front cover of this man- ® 6.9 treadmill. The CADENCE 6.9 treadmill offers an ual. To help us assist you, note the product model impressive selection of features designed to make number and serial number before contacting us. -
Page 6: Assembly
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton. - Page 7 3. Firmly tighten the two Upright Knobs (35) into the lower ends of the Uprights (17, 18). Make sure that the Upright Knobs (35) are fully tightened each time you use the tread- mill. 4. Pivot the Handrail (4) up as shown. Firmly tighten the two Handrail Knobs (15) into the upper ends of the Uprights (17, 18).
-
Page 8: Operation And Adjustment
OPERATION AND ADJUSTMENT HOW TO PLUG IN THE POWER CORD This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illus- DANGER: trated in drawing 1 below. A temporary adapter that looks like the adapter illustrated in drawing 2 may be Improper connection used to connect the surge suppressor to a 2-pole... - Page 9 CONSOLE DIAGRAM Clip FEATURES OF THE CONSOLE To turn on the power, see page 10. To use the man- ual mode, see page 10. To use a preset workout, The treadmill console offers an array of features de- see page 12. signed to make your workouts more effective and en- IMPORTANT: If there is a sheet of plastic on the joyable.
- Page 10 HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left.
- Page 11 4. Follow your progress with the display. To measure your heart rate, stand on the foot rails and hold the metal contacts on the handrail. Avoid moving your hands. When your pulse is As you exercise, the display can show the speed of detected, your heart rate will be shown.
- Page 12 HOW TO USE A PRESET WORKOUT The workout will continue in this way until the last segment ends. The walking belt will then slow to a 1. Insert the key into the console. stop. See HOW TO TURN ON THE POWER on page 10. If the speed setting is too high or too low at any time during the workout, you can manually override 2.
-
Page 13: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. -
Page 14: Troubleshooting
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. - Page 15 PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller bolt clockwise 1/2 of a turn and the right idler roller bolt counterclockwise 1/2 of a turn;...
-
Page 16: Exercise Guidelines
EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 17: Part List
PART LIST—Model No. WLTL19709.0 R0210A To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual. Key No. Qty. Description Key No. Qty. Description Console Motor Bracket Console Bracket Controller Console Knob Power Cord Handrail... -
Page 18: Exploded Drawing
EXPLODED DRAWING A—Model No. WLTL19709.0 R0210A... - Page 19 EXPLODED DRAWING B—Model No. WLTL19709.0 R0210A...
-
Page 20: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...