Table of Contents
Advertisement
Changing the Button Settings
1.
Click on the OneTouch icon.
2.
Right-click a button on the OneTouch Button Panel.
3.
The OneTouch Properties window opens.
The OneTouch Properties window will also open when you press, hold down for 3 seconds, and release the
Simplex or Duplex button.
Scanner button
configuration tab
Select the
Destination
Application that
will open when
you are finished
scanning. You use
the destination
application to
view and work
with your scanned
images.
Some of the options on the OneTouch Properties Window are "grayed out" and are not available, these options
are not appropriate for your scanner model.
4.
If your scanner has multiple scanner buttons, or an LED function selector on the scanner, select the button in
OneTouch that you want to change.
LED Number—Click the up or down arrow to cycle through the OneTouch buttons.
Button Tabs—Click on one of the tabs, across the top of the OneTouch properties window, to configure that
scanner button. There is one tab for each button on the scanner as well as the Options tab to change button
specific features.
5.
Select the destination you want OneTouch to send the scanned image to in the Select destination list.
If you select a word processing program such as Microsoft WordPad or Microsoft Word that can be used for
OCR (such as TXT or RTF), the text in scanned images is automatically converted to word processing text.
6.
Select a file format in the Select format panel.
The formats are based on the type of Destination Application you select. The icon names indicate their file
types. See
File Formats
50
®
Xerox
DocuMate
User's Guide
on page 63 for more information about the available formats.
®
4830
Select a file
format for your
scanned
images.
Select a
configuration
for scanning
the item.
Advertisement
Table of Contents
Troubleshooting
