Electrical Information; Warning - Electrical Safety Information; Electrical Supply; Disconnect Device - Xerox DocuMate 4830 User Manual

Hide thumbs Also See for DocuMate 4830:
Table of Contents

Advertisement

Electrical Information

Warning - Electrical Safety Information

1.
The power receptacle for the machine must meet the requirements stated on the data plate on the rear of the
machine. If you are not sure that your electrical supply meets the requirements, please consult your local
power company or an electrician for advice.
2.
The socket outlet shall be installed near the equipment and shall be easily accessible.
3.
Use the power cable that is supplied with your machine. Do not use an extension cord or remove or modify the
power cord plug.
4.
Plug the power cable directly into a correctly grounded electrical outlet. If you are not sure whether or not an
outlet is correctly grounded, consult an electrician.
5.
Do not use an adapter to connect any Xerox equipment to an electrical outlet that lacks a ground connection
terminal.
6.
Do not place this equipment where people might step or trip on the power cable.
7.
Do not place objects on the power cable.
8.
Do not override or disable electrical or mechanical interlock devices.
9.
Do not push objects into slots or openings on the machine. Electrical shock or fire may result.

Electrical Supply

This product shall be operated from the type of electrical supply indicted on the product's data plate label. If
you are not sure that your electrical supply meets the requirements, please consult your local power company
for advice.
Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet checked by a
qualified electrician.
WARNING: This equipment must be connected to a protective earth circuit.
This equipment is supplied with a plug that has a protective earth pin. This plug will only fit into an earthed electrical
outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace
the outlet.

Disconnect Device

The power cable is the disconnect device for this equipment. It is attached to the back of the machine as a plug-in
device. To remove all electrical power from the equipment, disconnect the power cable from the electrical outlet.
12
®
Xerox
DocuMate
User's Guide
®
4830

Advertisement

Table of Contents
loading

Table of Contents