Lan Ip Screen - ZyXEL Communications 100-NH User Manual

Chapter 7 LAN and VLAN

7.6 LAN IP Screen

Use this screen to configure the IP address for your NWA. Click Network > LAN to display the
following screen.
Figure 43 LAN IP
The following table describes the labels in this screen.
Table 27 LAN IP
LABEL
IPv4 Address
Assignment
Obtain IP Address
Automatically
Use Fixed IP Address
IP Address
Subnet Mask
Gateway IP
Address
90
DESCRIPTION
Select this option if your NWA is using a dynamically assigned IPv4 address from a
DHCP server each time.
Note: You must know the IP address assigned to the NWA (by the DHCP server) to
access the NWA again.
Select this option if your NWA is using a static IPv4 address. When you select this
option, fill in the fields below.
Enter the IP address of your NWA in dotted decimal notation.
Note: If you change the NWA's IP address, you must use the new IP address if you
want to access the web configurator again.
Type the subnet mask.
Type the IPv4 address of the gateway. The gateway is an immediate neighbor of your
NWA that will forward the packet to the destination. On the LAN, the gateway must
be a router on the same segment as your NWA; over the WAN, the gateway must be
the IP address of one of the remote nodes.
NWA1000 Series User's Guide