Mac Filter Screen - ZyXEL Communications 100-NH User Manual

Chapter 6 Wireless LAN
Note: You need to know the MAC address of each wireless client, AP, computer or router
that you want to allow to communicate with the NWA's wireless clients.
Figure 37 Wireless LAN > Layer-2 Isolation
The following table describes the labels in this screen.
Table 22 Wireless LAN > Layer-2 Isolation
LABEL
Index
MAC Address
Description
Apply
Cancel

6.9 MAC Filter Screen

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is
assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02. You need to know the MAC address of each device to configure MAC filtering
on the NWA.
82
DESCRIPTION
This is the index number of the MAC address listed.
Enter the MAC addresses of the wireless client, AP, computer or router that you want to
allow the associated wireless clients to have access to in these address fields. Enter the
MAC address in a valid MAC address format (six hexadecimal character pairs, for
example 12:34:56:78:9a:bc).
Enter a name to identify this device.
Click Apply to save your changes.
Click Cancel to begin configuring this screen afresh.
NWA1000 Series User's Guide