Panasonic WV-SW559 Installation Manual page 17

SD memory card
slot
SW559
About the [INITIAL SET] button
After turning off the power of the camera, turn on the power of the camera while holding down this
button, and wait for around 5 seconds or more without releasing the button. Wait around 2 minutes
after releasing the button. The camera will start up and the settings including the network settings
will be initialized. Do not turn off the power of the camera during the process of initialization.
Before initializing the settings, it is recommended to copy down the settings in advance.
Auto focus (AF) button/
Extra optical zoom button
Monitor out connector
for adjustment
Initial set button
SD memory card error indicator
Auto focus indicator
(blinks when adjusting auto focus)
Access indicator (blinks when accessing)
Link indicator (lit when linking)
Panning lock screw
Panning table
SW559 /
<WV-SW558>
< W V-SW558>
17