Lldp Medtlv Network-Policy - Planet Networking & Communication SGSD-1022 User Manual

lldp medtlv network-policy

This command configures an LLDP-MED-enabled port to advertise its network policy configuration. Use the no form to disable
this feature.
Syntax
[no] lldp medtlv network-policy
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises network policy configuration information, aiding in the discovery and diagnosis of VLAN
configuration mismatches on a port. Improper network policy configurations frequently result in voice quality degradation
or complete service disruption.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp medtlv network-policy
Console(config-if)#
show lldp config
This command shows LLDP configuration settings for all ports.
Syntax
show lldp config [detail interface]
• detail - Shows configuration summary.
• interface
• ethernet unit/port
-unit - Stack unit. (Range: 1)
-port - Port number. (Range: 1-28)
• • port-channel channel-id (Range: 1-12)
Command Mode
Privileged Exec
Example
Console# show lldp config
LLDP Global Configuation
User's Manual of SGSD-1022 / SGSD-1022P
613
SGSW-2840 / SGSW-2840P