Displaying Lacp Status For The Remote Side - Planet Networking & Communication SGSD-1022 User Manual

4.5.5.5 Displaying LACP Status for the Remote Side

You can display configuration settings and the operational state for the remote side of a link aggregation.
The page includes the following fields:
Object
Partner Admin System ID
Partner Oper System ID
been allocated to the correct Link Aggregation Group, the group has been
associated with a compatible Aggregator, and the identity of the Link
Aggregation Group is consistent with the System ID and operational Key
information transmitted.
• Aggregation – The system considers this link to be aggregatable; i.e., a
potential candidate for aggregation.
• Long timeout – Periodic transmission of LACPDUs uses a slow transmission
rate.
• LACP-Activity – Activity control value with regard to this link. (0: Passive; 1:
Active)
Figure 4-5-17 LACP Port Internal Information page screenshot
Description
LAG partner's system ID assigned by the user.
LAG partner's system ID assigned by the LACP protocol.
User's Manual of SGSD-1022 / SGSD-1022P
143
SGSW-2840 / SGSW-2840P