Mvr Port Information - Planet Networking & Communication SGSD-1022 User Manual

4.9.3.3 MVR Port Information

You can display information about the interfaces attached to the MVR VLAN.
The page includes the following fields:
Object
• Type
• Oper Status
• MVR Status
• Immediate Leave
• Trunk Member
4.9.3.4 MVR Group Member Configuration
For multicast streams that will run for a long term and be associated with a stable set of hosts, you can statically bind the
multicast group to the participating interfaces.
Figure 4-9-13 Port Information page screenshot
Description
Shows the MVR port type.
Shows the link status.
Shows the MVR status.
MVR status for source ports is "ACTIVE" if MVR is globally enabled on the
Managed Switch.
MVR status for receiver ports is "ACTIVE" only if there are subscribers receiving
multicast traffic from one of the MVR groups, or a multicast group has been
statically assigned to an interface.
Shows if immediate leave is enabled or disabled.
Shows if port is a trunk member.
222
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P