Dual Sound; Intelligent Volume - Sony KLV-S40A10 Operating Instructions Manual

Dual Sound

Selects the sound of NICAM or A2 (German) stereo system.
1
Press
2
Press M/m to select one of the following, then press
The selection varies, depending on the Broadcasting.
Broadcasting
NICAM stereo
NICAM bilingual
NICAM monaural
A2 (German) stereo
A2 (German) bilingual
Notes
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select "Mono". The sound
• The "Mono" setting is memorized for each program position.
• You cannot receive a stereo broadcast signal when "Mono" is selected for the program position.
• You cannot receive stereo or dual sound when "Low" or "High" is selected in "Audio Filter".
Tips
• NICAM is receivable in following countries/regions. Hong Kong, Singapore, New Zealand,
• A2 (German) is receivable in following countries/regions. Australia, Malaysia, Thailand, etc.
• If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "A" or "B".

Intelligent Volume

Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend to be
louder than programs).
1
Press
2
Press M/m to select "On", then press
to select "Dual Sound".
Selection
NICAM (stereo sound)
Mono (regular sound)
NICAM Main (main sound)
NICAM Sub (sub sound)
Mono (regular sound)
NICAM Main (main sound)
Mono (regular sound)
Mono (regular sound)
Stereo (stereo sound)
Main (main sound)
Sub (sub sound)
becomes monaural, but the noise is reduced.
Malaysia, Thailand, etc.
to select "Intelligent Volume".
.
.
27
GB