Color Temperature
1
Press
2
Press M/m to select one of the following, then press
Cool: Gives the white colors a blue tint.
Neutral: Gives the white colors a neutral tint.
Warm: Gives the white colors a red tint.
Tip
"Warm" only appears and can be adjusted if "Picture Mode" is set to "Custom".
Reset
Resets all the picture settings to the factory settings.
1
Press
2
Press M/m to select "OK", then press
NR (Noise Reduction)
Reduces the picture noise (snowy picture) in a weak broadcast signal.
Press
Auto: Automatically reduces the picture noise.
Off: Turns off the noise reduction feature.
Tip
This option cannot be used for an input signal from the Y, P
to select "Color Temperature".
to select "Reset".
to select one of the following NR settings.
.
.
/C
, P
/C
jacks of
B
B
R
R
.
25
GB