Picture Menu; Picture Mode; Picture/Brightness/Color/Hue/Sharpness/Backlight - Sony KLV-S40A10 Operating Instructions Manual

Picture menu

Picture

Picture Mode

Custom
Picture Max
Brightness 50
Color 50
Hue 0
Sharpness 15
Backlight 5
Color Temperature Warm
Reset
NR Auto
Select: Enter: Back:
Picture Mode

Picture/Brightness/Color/Hue/Sharpness/Backlight

24
GB
End:
WEGA GATE
Selects the picture mode.
1
Press to select "Picture Mode".
2
Press M/m to select one of the following picture modes, then press
Vivid: For bright wide spaces.
Standard: Optimal picture for home use.
Custom: Allows you to store your own preferred settings.
Note
You cannot adjust "Brightness", "Color", "Hue", and "Sharpness" when you select "Vivid" or
"Standard" in "Picture Mode".
Tip
You can also change the picture mode by pressing
"Picture" increases picture contrast (the color becomes deeper), or decreases it (the color
becomes softer).
"Brightness" brightens or darkens the picture.
"Color" increases or decreases color intensity.
"Hue" increases or decreases the green tone.
"Sharpness" sharpens or softens the picture.
"Backlight" brightens or darkens the backlight.
1
Press to select the option.
2
Press </, to set the level, then press
Tip
"Hue" can only be adjusted for an NTSC color signal (e.g., U.S.A. video tapes).
You can select the options listed below on the Picture
menu. To select options, see "Using WEGA GATE"
(page 22).
Tip
When you set the "Picture Mode" option to "Vivid" or
"Standard", you can adjust only "Picture", "Backlight",
"Color Temperature (Cool/Neutral)", "Reset" and "NR".
repeatedly.
.
.