Dual Sound - Sony Bravia KLV-40S310A Operating Instructions Manual

Sound Booster

Dual Sound

i Speaker Link
22
GB
Gives sound more impact by compensating for phase effects in speakers.
Choose either "High", "Low" or "Off".
~
"Sound Booster" is available when "Sound Mode" is set to "Custom".
Selects the sound from the speaker for a stereo or bilingual broadcast.
The selection varies, depending on the Broadcasting.
Broadcasting
NICAM stereo
NICAM bilingual
NICAM monaural
A2 (German) stereo
A2 (German) bilingual
~
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM programme, select "Mono". The sound
becomes monaural, but the noise is reduced.
• The "Dual Sound" setting is memorized for each programme position.
• You cannot receive a stereo broadcast signal when "Mono" is selected for the programme
position.
• You cannot receive stereo or dual sound when "Low" or "High" is selected in "Audio Filter"
(page 30).
z
• NICAM is receivable in following countries/regions. Hong Kong, Singapore, New Zealand,
Malaysia, Thailand, etc.
• A2 (German) is receivable in following countries/regions. Australia, Malaysia, Thailand,
etc.
• If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "Main" or
"Sub". However, when the external equipment connected to the HDMI jack is selected, this
is fixed to "Stereo", except HDMI IN 2 with DVI analogue sound input.
Turns the TV's internal speakers on/off when headphones are connected.
"On": Sound is output only from headphones.
"Off": Sound is output from both the TV and headphones.
Selection
Stereo (stereo sound)
Mono (regular sound)
Main (main sound)
Sub (sub sound)
Mono (regular sound)
Main (main sound)
Mono (regular sound)
Stereo (stereo sound)
Mono (regular sound)
Main (main sound)
Sub (sub sound)