NEC NEAX 2000 IVS Command Manual page 124

COMMAND CODE
12
MAT
YY
No. MEANING
03 Kind of Telephone
(TEL)
04 Tenant
(TENT)
05 Accommodation of sin-
(LNKD) gle line telephone to
Multiline Terminal
(Assignment for single
line telephone only)
Accommodation of FAX
Call Station to Multiline
Terminal
07 Service Restriction Class
(SFCC) C
12 Assignment of ISDN
Subscriber's Number/
(ISUBN)
Sending Number
13 Local Office Code Table
(ILOCT) (See CM50 YY = 05)
TITLE:
STATION CLASS-1
DATA
00 House Phone 0
01 House Phone 1
02 House Phone 2
03 House Phone 3
00 FAX Call Station Group No. 0
01 FAX Call Station Group No. 1
02 FAX Call Station Group No. 2
03 FAX Call Station Group No. 3
04 Hot Line (See CM52 YY = XX: Calling Side [0])
05 Automatic Intercom (See CM11, CM56 YY = 10)
06 Manual Intercom (See CM11, CM56 YY = 11)
07 Dial Intercom (See CM11, CM56 YY = 12)
08 Multiline Terminal Attendant Position Loop Lines (See CM11)
15 Ordinary Station (Other than data 00-08)
00 Tenant
01
63 Tenant
Note: When Tenant service is not provided, setting of this data
0 Accommodated
1 Not accommodated (see CM90 YY = 00)
Note: This command setting is required when SLT LENs are
0 Accommodated
1 Not accommodated
Note: When FAX Call Station No. is used for an ordinary tele-
XX XX
15
Note: The features available in each Class are programmed in
X ISDN Subscriber's Number (For calling number display
service)/Sending number for Enhanced 911
XXXX
00 Local Office Code Table Number 00
14 Local Office Code Table Number 14
15 Not assigned
ND-45669 (E)
Addendum-002
JANUARY, 1999
SETTING DATA
MEANING
(See CM51 YY=14)
Note 1
00
01
63
is not necessary. The data is automatically set to 01.
assigned to multiline keys.
phone, this command assignment is required.
Service Restriction Class C (00-15 )
CM15 YY = 80-98.
CM12
: Initial Data
CHAPTER 3
Page 101
Revision 2.2