Selecting The Spin Speed; Selecting Options - AEG Electrolux LAVAMAT BELLA 1481 User Manual

Table of Contents

Advertisement

Available languages

Available languages

8
How to run a wash cycle

Selecting the spin speed

Press the U/MIN / T/MIN button until the indicator
for the desired spin speed lights up. You can also
select the RINSE HOLD (SPÜLSTOPP / ARRÊT CUVE
PLEINE) option.
The maximum speed are :
for Cottons, Cottons+Prewash, 40-60 Mix, Econ-
omy : 1400 rpm, for Jeans, Synthetics, Easy iron,
Delicates, Wool plus, 30 Min, Super Eco : 900 rpm.
At the end of the programme, if you have selected
RINSE HOLD, you then need to select a SPIN or
DRAIN programme to finish the cycle.
RINSE HOLD (SPÜLSTOPP / ARRÊT CUVE PLEINE)
The last rinse water is not drained at the end of the selected programme to avoid creasing
the washing if it is not taken out of the drum immediately.

Selecting options

Options can be added to a wash programme that
has already been selected. Press the button for the
desired option. The corresponding indicator lights
up.
To deactivate an option, do the same thing. The
corresponding indicator goes out.
Stain (FLECKEN / TACHE)
For very dirty or stained washing. A stain removing product can be poured into the prewash
compartment
Sensitive (SENSITIV / SENSIBLE)
Rinsing action increased by an additional rinse cycle with, at the same time, reduced drum
movement (fabric protection). Ideal for frequent washes, for example, in the case of very
sensitive skin (not compatible with the Rinse plus option).
Time saving (ZEITSPAREN / GAIN DE TEMPS)
This function allows you to reduce the length of the cycle depending on the type of pro-
gramme selected.
Rinse plus
This option means one or more rinses can be added to the programmes Cottons, Synthetics
and Delicates (not compatible with the Sensitive option).
You are able to activate it permanently by proceeding in the following way :
Press the TEMP. / TEMP.°C and U/MIN / T/MIN buttons for a few seconds. The Rinse plus
(EXTRA SPÜLEN / RINCAGE PLUS) indicator lights up. The option is permanently activated,
even if the appliance is switched off. To deactivate permanently, repeat the same operation.
in the product dispenser.

Advertisement

Chapters

Table of Contents
loading

Table of Contents