Installation Instructions; Warnings; Installation; Unpacking - AEG Electrolux LAVAMAT BELLA 1481 User Manual

22

Warnings

Installation instructions

Warnings
• This appliance is heavy. Take care when moving it.
• The appliance must have the transit bolts removed before use. If all protective transit
devices are not removed, this could cause damage to the appliance or to neighbouring
cabinets or furniture. The appliance must be unplugged from the electricity supply when
the transit bolts are being removed.
• Connection to the water supply must be carried out by a qualified plumber.
• The appliance must be equipped with an earthed power plug which conforms to regu-
lations.
• If your domestic electrical circuit needs adapting to allow the appliance to be plugged
in, use a qualified electrician.
• Before connecting your appliance to the power supply, carefully read the instructions
in the chapter entitled "Electrical connection".
• Ensure that, after installation, the power cable is not trapped under the appliance.
• If the appliance is installed on carpeted floor, ensure that the carpet does not obstruct
any ventilation ducts located at the base of the appliance.
• Replacing the power cable should only be carried out by the After Sales Service.
• The manufacturer cannot be held responsible for any damage resulting from incorrect

installation.

Installation
Remove all protective packaging for transit before using for the first time. Keep in case
needed for future transit : Transporting a non-secured appliance may damage internal
components and cause leakages and malfunctions. The appliance can also be damaged
through physical contact.

Unpacking

1. Tilt the appliance backwards.