Table of Contents
Advertisement
other positions). This programme dial can be turned to the right or to the left.
If the programme dial is turned while the washing machine is on a washing
cycle, the error code "Err" appears in the display window and the START/PAU-
SE
button flashes in yellow for a few seconds. The programme then con-
tinues without taking any notice of the new position of the dial. To remedy
the problem, put the dial back to its initial position. The breakdown of the cy-
cle phases reappears in the display window.
Selecting the spin speed
Press the T/MIN
dicator for the desired spin speed lights
up. You can also select the NO SPIN*,
RINSE HOLD
PLUS*.
The maximum speed is 1200 rpm for all
the programmes.
At the end of the programme, if you have selected RINSE HOLD
SILENCE PLUS, you then need to select a SPIN
finish the cycle.
RINSE HOLD
The last rinse water is not drained at the end of the selected programme to
avoid creasing the washing if it is not taken out of the drum immediately.
Selecting options
Options can be added to a wash pro-
gramme that has already been selected.
Press the button for the desired option.
The corresponding indicator lights up.
To deactivate an option, do the same
thing. The corresponding indicator goes
out.
Prewash
Prewash at around 30°C before the main wash cycle which then proceeds
automatically.
* depending on model
button until the in-
*
or NIGHT SILENCE
How to run a wash cycle
or DRAIN
programme to
11
or NIGHT
Hide quick links:
Advertisement
Table of Contents
