Electrical Connection; Positioning - AEG Electrolux LAVAMAT BELLA 1481 User Manual

2. Fit the U-piece on the drainage hose. Place
everything in a drainage point (or in a sink)
at a height of between 70 and 100 cm.
Ensure it is positioned securely.
Air must be able to enter the end of the hose,
to avoid any risk of siphoning.
WARNING!
The drain hose must never be stretched. If it is
too short, contact a tradesperson.

Electrical connection

This washing machine must only be connected in single-phased 230 V. Check the fuse size :
10 A for 230 V. The appliance must not be connected with an extension lead or multi-plug
adaptor. Ensure that the plug is earthed and that it is in accordance with current norms.

Positioning

Position the appliance on a flat and hard surface in a ventilated location. Ensure the ap-
pliance does not come into contact with the wall or other furniture.
1. Accurate levelling avoids vibrations, noise
and prevents the appliance from moving
when running. Make the appliance level
by adjusting the foot that is too short.
Unscrew the whole foot and the collar
(Lift the appliance, if necessary).
2. When the appliance is stable, hold the foot
against the floor and raise the collar as far
as it will go.
29
Installation