Table of Contents
Advertisement
Installation
36
Air must be able to enter the end of the hose, to avoid any risk of siphoning.
The drain hose must never be stretched. If it is too short, contact a tradesper-
son.
Electrical connection
This washing machine must only be connected in single-phased 230 V.
Check the fuse size : 10 A for 230 V.
The appliance must not be connected with an extension lead or multi-plug
adaptor.
Ensure that the plug is earthed and that it is in accordance with current
norms.
Positioning
Position the appliance on a flat and hard surface in a ventilated location. En-
sure the appliance does not come into contact with the wall or other furni-
ture.
To move the appliance, proceed as follows :
1.To move your appliance, place it
on its rollers by pulling the lever
located at the base of the ap-
pliance hard from right to left.
Once the appliance is in the desi-
red position, push the lever back
to its original position.
2.Accurate levelling avoids vibra-
tions, noise and prevents the ap-
pliance
from
moving
running.
Make the appliance level by ad-
justing the foot that is too short.
Unscrew the whole foot and the
collar. (Lift the appliance, if ne-
cessary).
when
Hide quick links:
Advertisement
Table of Contents
