Cleaning And Maintenance; General Notes For Correct Operation; Cleaning And Scheduled Maintenance - Saeco Atlante 500 Use And Maintenance Manual

11

CLEANING AND MAINTENANCE

Unplug the power cord before performing any
cleaning and/or maintenance operation.
It is prohibited to perform cleaning or maintenance
operations on the internal components of the vending
machine with the safety microswitch disabling key
inserted.
The Manufacturer declines any liability for any damage
or malfunctioning caused by incorrect or poor
maintenance.
During the loading operations do not stress any of the
live electrical parts and do not clean them with damp
cloths.
Avoid using chlorine-based tablets so as to prevent
oxidation phenomena inside the vending machine.
11.1 General notes for correct
operation
The vending machine
components must be cleaned using non abrasive
sponges or damp cloths.
Do not direct water jets on the components and/or
on the vending machine.
Check for correct brewing of beverages and adjust the
grinding when necessary.
To guarantee the correct operation of the vending
machine it is recommended to conform to the instructions
and times indicated in the "MAINTENANCE SCHEDULE".
and its non-removable
11.2 Cleaning and scheduled
maintenance
All components must be rinsed with warm water only,
without using any detergent or solvent that could
modify their form and operation.
Removable components cannot be rinsed in the
dishwasher.
During the cleaning and maintenance operations do
not stress the following electrical components: CPU
card; starter port; interconnection port.
Do not clean the above mentioned electrical
components using damp cloths and/or degreasing
detergents. Remove dust residues with a jet of dried
compressed air or using an antistatic cloth.
English
73