Cup Supply; First Start-Up Of The Vending Machine; Water Circuit Filling - Saeco Atlante 500 Use And Maintenance Manual

Introduce the stirrers with their packing band into the
column; once they are placed on the bottom, cut and
remove the band.
When loading is complete,
counterweight.
Make sure the stirrers have no burrs, are not bent and are
all placed horizontally.
8.9

Cup supply

Use only cups suitable for automatic dispensing. Do not
press them against each other during the loading
procedure.
Do not try to turn the column manually.
When installing, with the cup dispenser empty, proceed as
follows:
• remove the cover of the cup dispensing tube.
• load two of the most accessible tubes.
• replace the cover on the cup columns.
8.10
Supply the vending machine (following the instructions
given previously) and plug it into the power supply (see
section "Power Grid Connection").
reinsert the metal
At this point the message "ATLANTE" will appear on the
display and the self-diagnosis phase is activated to check
the correct positioning of the machine devices.
During the self-diagnosis phase, the following devices are activated:
• the brew group, the nozzle arm and the stirrer/sugar dispenser, to get a
• if necessary, also the cup release motor and the cup holder will be
Instant products and coffee boilers are refilled also during the initialisation
phase (*).
When the initialisation is complete the warming phase starts and the
heating elements of the boilers are automatically switched on.
(*) During the initial start-up of the machine make sure the boilers are
actually full by starting the Maintenance and performing a refill of the coffe
boiler and a wash cycle
Carry out the grinder adjustment as indicated in the instructions at
section "Coffee Grinder Adjustment" after refilling the water circuit.
8.11
When the VM is first switched on, it is necessary to fill the
boilers. The instant product boiler (if present) is filled
automatically, while the Coffee boiler has to be filled
manually using the appropriate "BOILER FILL" item of the
maintenance menu.
First start-up of the vending
machine
correct starting positioning;
activated.

Water circuit filling

English
41