Maintenance & Handy Hints; After Use - Hoover 5650 Heritage Manual

Maintenance & Handy Hints
This appliance is equipped with a parking position on the side.
To open the tool storage cover, pull the latch of the cover towards you and lift to remove the cover.
Press downward with two tongue in front goes into place firstly and lock into place, a click can be heard.
There is a cord storage facility on the backside of the cleaner. Lay down the cable storage rack by pulling
it downward and wrap the cable around the rack. Make sure the cord storage rack is returned into
original position before using the device.
Warning: ensure the appliance is cooled down completely before
emptying, cleaning or storing.

After use

1. Switch the cleaner off and unplug from the mains power supply. Wait until the cleaner
has cooled down completely.
2. Release any steam pressure by pressing the steam trigger on the handle.
3. Apply the trigger lock.
4. Remove the filler cap.
5. Empty the boiler. Allow the inside of the boiler to dry out before replacing
the filler cap.
11305_HV_Heritage_5650_MultiSteamer_Manual_FA.indd 16 25/08/11 4:49 PM