Removing The Filler Ap; Refilling The Oiler - Hoover 5650 Heritage Manual

11305_HV_Heritage_5650_MultiSteamer_Manual_FA.indd 15

Removing the filler ap

1. Pull the power cable from the mains
power supply gently using the plug.
2. Keep the steam trigger pressed to allow
steam to escape.
3. Allow the cleaner to cool down
for 5 minutes.
4. Slowly turn the filler cap to loosen,
and wait a few seconds before fully
unscrewing the filler cap.

Refilling the oiler

1. Place the cleaner on a flat
level surface.
2. Make sure the cleaner
is switched off and not
connected to the mains
power supply.
3. Press the steam trigger to
allow steam to escape.
4. Allow the cleaner to cool
down for several minutes.
5. Fill the boiler as described
previously. Warm water
can be used.
25/08/11 4:49 PM